French Door Measure Form Items in BOLD are required. All your information is kept private.  We do NOT share your email address.   Contact Information:
Name:	* required
Email:	* required
Re-enter Email:	* required
Phone:	* required
Door Measurements and Information:       Fill in all that apply.  Put "N/A" for any item that is not applicable.       All measurements should be in inches
Door Name: Used to differentiate doors if more than one.
Handle Side: When looking at the side of the door that will have the shutters mounted on it, the door handle is on the: Select One right side left side
Handle Type: Select One Lever Handle Round Doorknob
Window Grid: Select One No grid - just flat glass Grid between window panes. Entire surface of glass is flat Grid on top of window. Grid protrudes from window 1/8 inch. Grid on top of window. Grid protrudes from window 1/4 inch. Grid on top of window. Grid protrudes from window 3/8 inch. Grid on top of window. Grid protrudes from window 1/2 inch. Grid on top of window. Grid protrudes from window 5/8 inch. Grid on top of window. Grid protrudes from window 3/4 inch. Grid on top of window. Grid protrudes from window 7/8 inch. Grid on top of window. Grid protrudes from window 1 inch or more.
Plantation Shutter Type: Be sure to reference our on-line catalog if needed. Select One Do not know yet. PolyCore, 2-1/2" louvers PolyCore, 3-1/2" louvers PolyCore, 4-1/2" louvers Crestview, (3-1/2" louvers only) Basswood, 1-7/8" louvers Basswood, 2-1/2" louvers Basswood, 3-1/2" louvers Basswood, 4-1/2" louvers Classic Line, 2-1/2" louvers Classic Line, 3-1/2" louvers Classic Line, 4-1/2" louvers Alder, (3-1/2" louvers only)
A.  Width of door:
B.  Height of door:
C.  Width outside of trim:
D.  Height outside of trim:
E.  Width inside of trim (glass):
F.  Height inside of trim (glass):
G.  Center of handle to bottom of glass:
H.  Center of handle to bottom of door:
I.  Glass depth:
J.  Trim thickness:
K.  Door to back of handle: If varies, use smallest measurement
L.  End of handle to center (pivot point):
M.  Width of trim:
N1.  Trim to handle base plate: Note: This is the amount of flat mounting surface between trim and handle.
N2.  Trim to lock base plate: Note: This is the amount of flat mounting surface between trim and lock.
Q.  Width of base plate:
R.  Distance between center of lock and center of knob:
S.  Distance between top of lock base plate and center of knob:
Additional Comments:	Please input any additional information here.